Western Horse Gear & Saddle Tack | State Line Tack– Page 100

A trail. An arena. For pleasure. For competition. Ride your way. Riders love Western tack for an indefinite number of reasons. Western saddles and horse tack have a long history of popularity due to their dependability and their comfort for both horse and rider. Experience for yourself how Western horse gear can help make your next ride more enjoyable and more comfortable. Recommended Reading: How to Choose the Right Western Spurs Western tack is distinct from that of the English riding discipline due to its leather design and functionality. It’s made to suit Western riders by providing maximum comfort and functionality. Western horse gear ranges from saddles, saddle pads, reins, roping equipment, and more.

Western tack is distinct from that of the English riding discipline due to its leather design and functionality. It’s made to suit Western riders by providing maximum comfort and functionality. Western riding gear ranges from saddles, saddle pads, reins, roping equipment, and more.

Frequently Asked Questions

How do I know what size saddle tree fits my horse's back?

Tree fit comes down to gullet width and bar type, not seat size. Bars are shaped to match a horse's shoulder angle and back width, and most Western saddles fall into a few standard categories:

Semi-quarter horse bars: narrower, suited to horses with higher withers and a leaner build
Full quarter horse bars: wider spread, common on stock-type horses with rounder backs
Gaited bars: shaped differently to clear the shoulder movement of gaited breeds
Draft bars: widest option, built for heavy-boned horses

Gullet height and width matter as much as bar type. A saddle with a 6.5 inch to 7 inch gullet width generally suits an average Quarter Horse, while anything narrower risks pinching the withers and anything too wide will rock side to side. The safest approach is a wither tracing or a fitter's assessment rather than relying on seat size alone, since two saddles with the same seat measurement can sit completely differently depending on tree shape.

What's the difference between drop D rigging and in-skirt rigging on a Western saddle?

Both are cinch attachment systems, but they change how pressure is distributed across the horse's ribcage.

Rigging Type	How It Works	Best For
Drop D	Metal D-ring hangs below the tree, positioned closer to true center fire	Trail and pleasure riding, even pressure distribution
In-Skirt	Rigging is sewn directly into the skirt with no external hardware	Lightweight saddles, roping, everyday ranch work
7/8 Position	Rigging sits back slightly from full double rigging	General riding where a single cinch is preferred

In-skirt rigging tends to run lighter and cleaner looking since there's no exposed ring, but drop D setups often give a slightly more forward pull that some riders feel keeps the saddle from creeping back during hard stops.

How does saddle pad material actually affect pressure on my horse's back?

Pad performance comes down to how the material compresses and rebounds under load, not just thickness. A few material categories dominate the Western market:

Wool felt: dense, slow to compress, excellent long-term shock absorption, common in F1-rated felt rated near 21 PSI compression resistance
WoolBack fleece: virgin wool pile that wicks moisture fast and resists matting compared to synthetic fleece
Gel-layer pads: distribute shock laterally through a gel base rather than just cushioning vertically, often marketed for endurance and trail use
Contoured shim pads: allow removable felt inserts so a rider can correct minor front-to-back fit issues without buying a new saddle

A pad cannot fix a poorly fitted tree. It can only buy a small margin of correction, usually no more than a quarter inch of lift in any one spot before the saddle starts to sit unevenly again.

What's the real difference between a Western snaffle bit and a shank bit?

The mechanism, not just the shape, is what separates these two categories.

Snaffle: works on direct pressure with no leverage, the mouthpiece moves independently on the rings, suited to horses still learning rein cues
Shank (curb): uses a lever arm off the mouthpiece, so rein pressure is multiplied at the poll and chin depending on shank length
Port height: a higher port gives tongue relief but increases pressure on the bars and roof of the mouth when the shank rotates
Mouthpiece metal: sweet iron and copper inlays are used specifically to encourage salivation and a softer mouth over time through natural oxidation

Longer shanks amplify pressure faster with less rein movement, which is why green horses and young riders are generally better matched to a snaffle or a very short, low-port shank rather than jumping straight to a long-shank curb.

How do I tell if my Western cinch is causing girth soreness?

Most girth soreness traces back to material stiffness or buckle design rather than the cinch being too tight.

Check for hair loss or rubbed patches directly behind the elbow, which usually points to a cinch that's too narrow for the horse's barrel
Stiff mohair or straight neoprene without a roller buckle can create friction as the horse moves, especially at the gallop
Roller buckle designs are built specifically to let the billet strap roll instead of dragging leather against leather, which reduces rubbing at the attachment point
Felt-lined cinches disperse pressure more evenly across a wider surface than a plain webbing cinch of the same width

If soreness persists after switching materials, the issue is very often rigging position rather than the cinch itself, since a rigging set too far forward will pull the cinch into the elbow no matter what it's made of.

What separates a barrel racing saddle from a trail saddle?

The two are built around opposite priorities, which shows up clearly in tree and skirt design.

Feature	Barrel Saddle	Trail Saddle
Skirt shape	Short, rounded for close ground contact through turns	Longer, squared for weight distribution over hours in the saddle
Seat depth	Deep pocket seat for security at speed	Moderate depth, prioritizes rider comfort over multiple hours
Tree weight	Lightweight, often 12 to 20 lbs total saddle weight	Slightly heavier, built for stability over uneven terrain
Stirrup type	Angled aluminum for quick foot repositioning	Wider tread, often leather wrapped for all-day comfort

A saddle built for barrel work will feel unstable on a six hour trail ride because the shorter skirt concentrates weight over a smaller area of the horse's back, while a trail saddle's longer skirt and higher cantle will slow a rider down during fast, tight turns.

Western Saddles & Tack

Filter and sort

Filter

Sort by:

Recently viewed

Frequently Asked Questions